Ultra Plus Type 1
Type-1 Grade Water :-
-
Integrated table top/wall mounted sleek lab water system.
-
Produces Type-I water and TDS is Zero.
-
Flow Rate - 2 Ltrs/min
-
Lowest initial investment towards the cost of the system.
-
Most economical ultra pure water cost per liter compared to any water purification system available in the market in this category.
Applications/Uses of ULTRA PLUS Water Purification System:-
- Suitable for UPLC/HPLC/GC Molecular Biology works
- all Reagent General Analysis,IC,AAS,ICP-MS
- Mammalian cell culture
- Recombinant DNA studies
- Electrophoresis gel make-up and monoclonal antibody production
- Ultra trace inorganic and organics analysis
- TOC Analysis
- PCR
- 2-D Electrophoresis
- Critical Cell Culture and Sequencing etc.
Specifications
Additional Info
|
Parameters |
Ultra Plus UV |
Ultra Plus UF |
|
Display |
5.7” TFT Graphic Display |
5.7” TFT Graphic Display |
|
Resistivity |
18.2Mohm.cm at 25°C |
18.2 Mohm.cm at 25°C |
|
Conductivity |
0.05µS/cm |
0.05 µS/cm |
|
Online UV Absorbance |
254 nm |
254 nm |
|
UF Membrane(NMWL/MWCO/Dalton) |
- |
5000 |
|
Particulates(>0.22 µm/ml) |
<1 |
<1/ml |
|
TOC(ppb) |
<10ppb* |
<5ppb* |
|
Bacteria cfu/10ml |
<1.0 |
<0.01cfu/ml |
|
Endotoxins/Pyrogens(EU/ml) |
- |
<0.001 |
|
End Point Filter |
0.22 micron(EFA-260cm2) |
0.22 micron (EFA- 260cm ) |
|
Product Flow Rate |
Upto 2L/min |
0.1 to > 2L/ min |
|
Dnase |
- |
<0.005pg/µL |
|
Rnase |
- |
<0.001ng/ml |
|
Analytical Instruments |
Yes |
Yes |
|
AAS/ICP/MS/IC |
Yes |
Yes |
|
HPLC/GC/TOC |
Yes |
Yes |
|
Organic Analysis |
Yes |
Yes |
|
Cell & Tissue Culture |
No |
Yes |
|
In Vitro Fertilization |
No |
Yes |
|
Electrophoresis/PCR |
No |
Yes |
|
DNA Sequencing |
No |
Yes |
|
Molecular Biology |
No |
Yes |
-
Only if online UV is incorporated in the system and feed water TOC<250ppb.
-
Absorbance at 254 nm/cm optical path (A.U.): ?<0.001,Dry residue after evaporating on heating at 110°C:NA.
-
Ionic and Organic Rejection/Removal: >99%, Turbidity in NTU of Ultra Pure water <0.02 pH: 7/Neutral with online measurement. TOC:*<1-2 ppb with dual UV and UF Bacteria: Under aseptic condition<1cfu/1000ml ie 0.001cfu/ml Proteases:< 0.10μg/mL
-
Product Quality:-Type-I Reagent Grade Water
-
Feed Water Requirement: (RO/DI/DM/Analytical Grade):- Flow Rate:5L/10L/15L/20L/30L/50L/Hr Capacity Conductivity up to 20μS/cm,Tank:20L/50L/100L Temp.:-<55°C,Chlorine in feed:3ppm,TOC up to 100ppb Conductivity Cell:- Coaxial, Cell constant K=0.01, MOC:SS316L,0.1°C accuracy thermostat to measure Resistivity
-
Other specifications for Ultra plus Models: Display: LED/LCD/TFT 5.7” Touch screen display for conductivity, temperature with time.
-
Controller: Microprocessor based controller with key pads.
-
Power Supply:-230V+ 10%, 50Hz, AC. Power Consumption: 60 Watt/Hour. Weight (Approx.):25Kgs.
-
Dimensions: 550 mm(H),420mm(W),505mm(D)