Ultrapure WPS Element-free
The USPs of the system are:
*Type-I,Type II,Type-III water in a single integrated table top/wall mounted sleek unit
*Ultra Pure(Type-I) & Analytical Grade Water(Type-II) in a single integrated system.
*Three stage Integrated pretreatment module of 10µ/5µ/1µ/0.5µ/iron filter, activated carbon, antiscalant,enough to protect and enhance the life of the precious cartridges.
*High recovery upto 70% of water with polyamide T.F.C.membrane double Pass R.O.
*Most economical ultra pure water system comparing to other systems in the market.
*Ionic and Organic Rejection/Removal: >99%
Applicatios/Uses:-
- All Reagent Grade Water applications like Media/Buffer preparations
- Molecular Biology, Biotechnology,Microbiology
- Analytical Instruments like UPLC/HPLC/GC/ TOC/ICP/MS/IC/AAS
- Organic Analysis
- Cell &Tissue Culture
- In Vitro fertilization
- Electrophoresis
- PCR
- DNA, Sequencing
- RNase/ DNase Applications
- Biochemicals Feed water for Lab equipments like autoclave, stability chamber,humidifiers etc.
Specifications
Additional Info
Product Specifications
|
Parameters |
Model: Dura-Q Premium(Element)-5/10/15/20 |
|
Display |
5 .7” TFT /LED/LCD Display |
|
Product Water |
Type-I/ Type-II/Type III |
|
Type-I Grade Water Specifications:- |
|
|
Resistivity |
18.2 MOhm.cm at 25°C |
|
Conductivity |
0.05μS/cm |
|
TOC |
<1ppb** |
|
Particulates(>0.1μm&<0.22μm) |
<1/ml |
|
Bacteria (1cfu/100ml) |
<0.01cfu/ml |
|
Endotoxines/ Pyrogens (EU/ml) |
<0.001 |
|
RNase (ng/ml) |
<0.001 |
|
DNase (pg/μl) |
<0.005 |
|
Dispense Rate(Programmable) |
> 2 L/min |
|
UF Membrane(NMWL/MWCO)* * |
5000 |
|
End Point Filter |
0.2,/0.1μ (EFA: 250cm/260cm ) |
|
Type-II Grade Water Specifications:- |
|
|
Resistivity |
10-15MOhm.cm at 25°C |
|
Conductivity |
0.1-0.06μS/cm |
|
TOC |
<10ppb*** |
|
Particulates (>0.1μm &<0.2μm |
<1/ml |
|
Deionization |
Mixed Bed Resins/EDI**** |
|
Type-III Grade Water Specifications:- |
|
|
Conductivity |
<20μS/cm*** |
|
Product Flow Rate (L/hr) |
5/10/15/20 |
|
Tank |
Yes |
|
Feed/RO/%Rejection Monitoring |
Yes |
|
Cell Constant |
K= 0.01/0.1/1.0 |
-
Absorbance at 254 nm/cm optical path (A.U.): <0.001 and Dry residue after evaporating on heating at 110°C:NA TOC:*<1-2ppb with Dual UV,**<1ppb with dual UV and UF **Proteases:< 0.10μg/m ***Depends upon feed water conductivity ****Electro-Deionization with self regeneration. Turbidity in NTU of Ultra Pure water <0.02 pH:7/Neutral with online measurement (7.0+0.2) Bacteria: under aseptic condition<1cfu/1000ml i.e. 0.001cfu/ml.
-
Feed Water: Potable Tap Water/RO water/DM/DI Water. Feed Water Pressure:- 0.5Kg -1.5Kg(1-6bar), pH: 4 to10 units. Conductivity up to 2000 μ S/cm, TOC: up to 2000ppb. Temp.:<50°C, CO2:<50ppm, Chlorine:250ppm, HCO3:7.5ppm. Fouling Index: up to 50, Conductivity Cell:- Coaxial, Cell Constant K=0.01/0.1/1.0. MOC:SS316L, 0.1°C thermostat. for measurement of resistivity.Element free water
-
Other specifications: Display: 5.7” TFT Graphic/Touch screen for conductivity, temperature with time, recirculation/recovery loop, TDS: Zero. Controller: Microprocessor based graphic TFT display Power Supply:- 230V+ 10%, 50Hz, AC. Power Consumption: 60 Watt/Hour, Wt.(Appx.) :25Kgs. Dimensions: 550 mm(H), 420mm(W), 505mm(D) Self-regenerating electro deionization(EDI), ZAP-10/20 USA make.