UltraPure Grade Type 1 Water Purification System
Our Lab Ultra and Ultra Plus series of water purification systems offer the most economical Ultra Pure grade Type 1 water based on cost per liter as compared to any water purification system available in the market in this category.
Ultra Plus Series
Highlights:
- Integrated table top/wall mounted sleek lab water system.
- Produces Type-I water and TDS is Zero.
- Lowest initial investment towards the cost of the system.
- Three stage pre-filteration of10µ/5µ/1µ/0.5µ, Flowrate:50LPH Feed Water: RO/DI water.
Specifications:
Model Ultra Plus UV
Model
Ultra Plus UF
Model
Display 5.7” TFT /LED/
LCDGraphic
Display
5.7”TFT /LED/
LCDGraphic
Display
Resistivity 18.2 Mohm.cm
at 25°C
18.2 Mohm.cm
at 25°C
Conductivity 0.05 µS/cm 0.05 µS/cm Online UV
absorbance
254nm 254nm UF Membrane
(NMWL/
MWCO/Dalton)
------- 5000 Particulates
(>0.1µm &
<0.22 µm)
<1/ml <1/ml TOC (ppb) <10ppb* <5ppb* Bacteria
(1cfu/100ml)
<0.01cfu/ml <0.01cfu/ml Endotoxins/
Pyrogens
(EU/ml)
------- <0.001 End Point
Filter
0.22 micron
(EFA- 260 cm2 )
0.22 micron
(EFA- 260 cm2 )
FlowRate/Auto
volume
dispense rate
0.01 to>= 2L/min 0.01 to >= 2L/ min Dnase ------- <0.005pg/µL Rnase ------- <0.001ng/ml Analytical
Instruments
Yes Yes AAS/ICP/
MS/IC
Yes Yes HPLC/GC
/TOC
Yes Yes Organic
Analysis
Yes Yes Cell & Tissue
Culture
No Yes In Vitro
Fertilization
No Yes Electroph
oresis/ PCR
No Yes DNA
Sequencing
No Yes Molecular
Biology
No Yes *1-2ppb with Dual UV Lamp,pH:7/Neutral with online measurement,Turbidity in NTU of Ultra Pure water:0.04
ELEMENTAL ANALYSIS(ppb):
Fe,Cu,Al,Ni,Zn,Cr,Na,K,Cl,NO2,NO3,SO4:<0.005Lab Ultra Series
Highlights:
- High recovery upto 55% of water with TFC polyamide R.O. module.
- Type-I Water in a Single compact bench top/wall mounting system.
- Ultra Pure Water directly from tap water
- Prefil-I/Prefill-III stage pre filtration setup.
Specifications:
PARAMETERS Model: Lab-Ultra Display 16×4 Character LCD Resistivity 18.2 MOhm.cm
at 25°C m at 25°C
Conductivity 0.05µS/cm Ionic Rejection > 99% Inorganics and
Particulates Rejection
> 99% TOC (ppb) < 5ppb* Particulates
( >0.22µ/ml)
<1 Bacteria (cfu/100ml) <0.01cfu/ml Endotoxins/
Pyrogens (EU/ml)
<0.001** Rnase (ng/ml) <0.001** Dnase (pg/µl) <0.005** Auto Volume
Dispense/Product
Flow Rate(Type-I)
100 to 500ml/min*** UF Membrane
(NMWL/MWCO)
5000 (Optional) End Point Filter 0.22 micron
(EFA: 260cm2)
% RO Rejection Yes Auto Flushing with
Customized Times
Yes Feed Water Monitoring Yes Cell Constant (K) 0.01/0.1 Temperature
Compensation
0 to 100°C Low/ High Feed
Water Protection
Yes Tank Optional Prefiltration Three Stage