Lab Grade Type 3 Water Purification System
Our Lab Q-I Series and Lab Pure Series of water purification systems offer the most economical Laboratory Grade Type 3 water based on cost per liter as compared to any other water purification system available in the market in this category.
Lab Q-I Series
Highlights:
- Single stage pre-filteration setup of 10µ/5µ/1µ to protect and enhance the life of the RO cartridges
- Better substitute to Quartz/ Glass Single/ Double** Distillation Apparatus, TDS is zero.
- Easy quick fit connectors to exchange filter/module
- Very Low Electricity consumption as compared to conventional distillation apparatus, low maintenance.
- Saves potable water from tap up to100L/hr VS distillation units
- High recovery rate>30% of double RO Pass
- No Scaling problem as compared to Distillation Saves Water as compared to conventional distillation method. Rapid and simple disinfection
Specifications:
Water Purification System Model:
LabQ-I
Display
16×4 Character LCD
Resistivity
1-5 Mohm.cm at 25°C
Conductivity
1-0.2µS/cm
Ionic Rejection
> 98%
Inorganics &
Particulates Rejection
> 99%
TOC (ppb)
<30ppb*
Bacteria/Microbial
Particles
<100cfu/ml)
Flow Rate/Auto
dispense Rate
5/10/15/20 Ltr/Hr
Product Water Grade
Type III/Type II**
Product Water
Monitoring
Yes
% RO Rejection
Yes
Auto Flushing with
Customized Times
Yes
Feed Water Monitoring
Yes
Cell Constant (K)
0.1/0.01
Temperature
Compensation
0 to 100°C
Low/ High Feed Water
Protection
Yes
Tank
Yes
Prefiltration
Double Stage (Micron)
Datalogging
Yes
* Feed Water TOC <250ppb
** Depends upon feed water conductivity <300µS/cm
Lab Pure Series
Highlights:
- Single stage pre-filteration setup of 10µ/5µ/1µ to protect and enhance the life of the RO cartridges
- Better substitute to Quartz/ Glass Single/ Double** Distillation Apparatus, TDS is zero.
- Easy quick fit connectors to exchange filter/module
- Very Low Electricity consumption as compared to conventional distillation apparatus, low maintenance.
- Saves potable water from tap up to100L/hr VS distillation units
- High recovery rate>30% of double RO Pass
- No Scaling problem as compared to Distillation Saves Water as compared to conventional distillation method. Rapid and simple disinfection
Specifications:
Water Purification System Model:
Lab Pure
Display
16×2 Character LCD
Resistivity
0.1-1.0 Mohm.cm
at 25°C
Conductivity
10-1µS/cm
Ionic Rejection
> 98%
Inorganics&Particulates
Rejection
> 99%
TOC (ppb)
<50ppb*
Bacteria/Microbial
Particles
<100cfu/ml)
Flow Rate/Auto
dispense Rate
5/10/15/20 Ltr/Hr
Product Water Grade
Type III
Product Water
Monitoring
Yes
% RO Rejection
Yes
Auto Flushing with
Customized Times
Yes Feed Water Monitoring
Yes
Cell Constant (K)
1.0/0.1
Temperature
Compensation
0 to 100°C
Low/ High Feed
Water Protection
Yes
Tank
Optional
Prefiltration
Single Stage (Micron)
Datalogging
-------
* Feed Water TOC <250ppb
** Depends upon feed water conductivity <300µS/cm